BLOG

Iingxaki eziqhelekileyo kunye neendlela zokuphucula ngexesha CNC ukuchaneka machininginkqubo (1)

A, Umsebenzi ogqithisiweyo
Isizathu:
1. Umese wasentwasahlobo, amandla omese akade kakhulu okanye amancinci kakhulu, okubangelwa i-spring knife.
2. Ukusebenza ngokungafanelekanga komsebenzisi.
3. Isibonelelo esingalinganiyo sokusika (njenge-0.5 kwicala lomphezulu kunye ne-0.15 phantsi)
4. Iiparamitha zokusika ezingafanelekanga (ezifana nokunyamezela okukhulu, ukusetwa kweSF ngokukhawuleza, njl.)
Ukuphucula:
1. Umgaqo wemela: inokuba nkulu okanye incinci, imfutshane okanye imfutshane.
2. Yongeza inkqubo yokucoca i-Angle ukugcina umda njengoko kunokwenzeka (umda kwicala kunye nezantsi kuyafana).
3. Uhlengahlengiso olunengqiqo lweeparamitha zokusika, kunye nomda omkhulu ojikeleze ikona.
4. Ukusebenzisa umsebenzi we-SF wesixhobo somatshini, umqhubi unokulungelelanisa isantya ukuze afezekise umphumo ongcono wokusika.

B, imiba malunga nokwahlula phakathi

Isizathu:
1. Ukusebenza ngesandla ngumqhubi akuchanekanga.
2. Kukho i-burrs ejikeleze ukungunda.
3. Kukho umazibuthe kwibha ephakathi.
4. Amacala amane okubumba awakho perpendicular.

Ukuphucula:
1. Ukusebenza ngesandla kufuneka kuhlolwe ngokucophelela ngokuphindaphindiweyo, kwaye uzame ukuba kwindawo enye kunye nokuphakama okufanayo.
2. Gcoba imiphetho yokubumba ngelitye okanye ifayile, uze uzisule ngamalaphu, kwaye ekugqibeleni uqinisekise ngesandla.
3. Khuphisa ibha yolwahlulo yizibuthe phambi kokwahlula ukungunda (ibha yeceramic okanye enye ingasetyenziswa).
4. Ukulinganisa itafile ukujonga ukuba ngaba amacala amane obumba amile (ukuba impazamo ye-perpendicularity inkulu, isicwangciso kufuneka sihlaziywe kunye ne-locksmith).
I-JIUYUAN inenzuzo kwi Aluminiyam CNC iindawo machining,anodized CNC iindawo machining,intsimbi CNC iinxalenye machining,iinxalenye zeplastiki CNC machining, iintlobo ezahlukeneyo zokuchaneka kweendawo ze-CNC.I-JIUYUAN iya kukunceda ufumane izisombululo ezifanelekileyo kwiiprojekthi zakho.